Enhanced struvite recovery from wastewater using a novel cone-inserted fluidized bed reactor

The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. The crystallization process was continuously operated for 133 days under different hydraulic retention times （HRT = 1-10 hr）, pH （7.5-10）, and molar ratios of Mg/P （0.75-1.75）, N/P （1-10） and Ca/Mg （0-2）. The optimum operating conditions of HRT, pH, Mg/P and N/P molar ratios were found to be 2 hr, 9, 1.25, and 7.5, respectively. Under these optimum conditions, the phosphorus precipitation efficiencies of FBRwc were 93% for low and 98% for high phosphorus influent; however, the efficiencies were 78% and 81% for FBRwoc, respectively. Due to crystal losses at each junction （17%-31%）, the crystal recovery efficiency of FBRwoc was relatively low （47%-65%） for both influent concentrations. However, the losses were minimal in FBRwc, which showed 75% and 92% crystal recovery for low and high phosphorus concentrations, respectively. At low calcium concentration, crystal chemical analysis showed the product to be pure struvite （〉 99%）. The scanning electron microscope and X-ray diffraction results further confirmed that the crystal recovered from FBRwc contained pure struvite, which could be considered a high quality fertilizer. Except HRT, all parameters （pH, Mg/P, N/P and Ca/Mg） were found to be influencing factors for FBRwc performance. Overall, inserting cones in each part of the reactor played a significant role in enhancing struvite recovery from a wide range of phosphorus-containing wastewater.     

Arsenic removal from groundwater by acclimated sludge under autohydrogenotrophic conditions

Arsenic in the environment is attracting increasing attention due to its chronic health effects. Although arsenite(As(III)) is generally more mobile and more toxic than arsenate(As(V)), reducing As(V) to As(III) may still be a means for decontamination, because As(III) can be removed from solution by precipitation with sulfide or by adsorption or complexation with other metal sulfides. The performance of As(V) bio-reduction under autohydrogenotrophic conditions was investigated with batch experiments. The results showed that As(V) reduction was a biochemical process while both acclimated sludge and hydrogen were essential. Most of the reduced arsenic remained in a soluble form, although 20% was removed with no addition of sulfate, while 82% was removed when sulfate was reduced to sulfide. The results demonstrated that the reduced arsenic was re-sequestered in the precipitates, probably as arsenic sulfides. Kinetic analysis showed that pseudo first-order kinetics described the bio-reduction process better than pseudo second-order. In particular, the influences of pH and temperature on As(V) reduction by acclimated sludge under autohydrogenotrophic conditions and total soluble As removal were examined. The reduction process was highly sensitive to both pH and temperature, with the optimum ranges of pH 6.5–7.0 and 30–40°C respectively. Furthermore, Arrhenius modeling results for the temperature effect indicated that the As(V) reduction trend was systematic. Total soluble As removal was consistent with the trend of As(V) reduction.     

化学合成类制药行业工艺废气VOCs排放特征与危害评估分析

以浙江台州6家典型化学合成类制药企业为代表,对其排放工艺废气中的18项挥发性有机物(VOCs)特征污染物(如甲苯、甲醛、二氯甲烷等)进行监测和分析,并采用臭氧产生潜力(OFP)和健康风险评价指标对VOCs所产生的环境与健康危害进行初步的评价.结果表明,化学合成类制药企业排放的总VOCs浓度为14.9~308.6 mg·m-3,其产生环境危害的OFP值为3.1~315.1 mg·m-3,主要贡献物质为甲苯、四氢呋喃、乙酸乙酯等6种物质,存在较大的潜在环境危害.另外,健康危害中的非致癌风险指数和总致癌风险指数介于9.48×10-7~4.98×10-4a-1和3.17×10-5~6.33×10-3之间,主要是苯、甲醛和二氯甲烷这3种致癌物.     

柠檬酸对砷污染土壤的萃取优化条件实验研究

论文以新邱矿矸石山排土场土壤为研究对象,以去离子水做空白试验,选取尿素、十二烷基磺酸钠、碳酸氢钠、醋酸、柠檬酸等12种化学试剂做了萃取剂初选试验;并以柠檬酸为萃取剂进行了三因素三水平L9(33)正交实验。实验结果表明:柠檬酸和氢氧化钠可作为砷污染土壤的萃取剂,具有良好的萃取效果。柠檬酸作为砷污染土壤萃取剂的最优化条件是液土比为10mL/g,萃取时间为12h,萃取剂浓度为0.1mol/L。实验结果可为砷污染土壤的治理提供参考。     

焦化行业清洁生产指标体系的建立及应用研究

目前,焦化行业的清洁生产水平无量化标准,焦化企业间清洁生产水平无法量化比较,为此,将创新性地设立焦化行业的清洁生产指标体系和清洁生产指标体系的考核评分计算方法,将该体系应用于焦化行业的典型企业,对企业清洁生产水平量化打分,并进行了普适性研究。该方法的提出可以很好的解决对不同清洁生产水平的企业进行量化排序的问题,从而达到既能发现公司清洁生产潜力,又能够明确企业在同行业中的位置的目的。     

基于《环境影响评价》的研究性系列实验设计与教学实践研究

为提高高校本科生实验及实践类课程教学水平,基于笔者十余年实践类课程教学实践,介绍了以课程形式新建的具有研究性特质的系列本科生教学实验,实验素材主要源于“理论课程中的经典研究方法、学科前沿的科学研究实验和成熟的社会应用技术方法和规范”,最后基于具体实践教学案例,详细阐述了上述系列研究性实验的教学细节和流程.希望本研究的探索工作能够为中国高校实验教学的深入改革,以及建立基于学科的国家级基础实验教学示范中心提供基础和借鉴.     

车辆加载减速法技术防弊措施分析研究

加载减速法（LugDown）排气检测用底盘测功机模拟柴油车在行驶道路上的高负荷运行状况,对整车性能、特别是机械与安全性能要求高,且面对复杂的社会关系与经济诱惑,难免会出现操作不规范或作弊情况.监管部门应结合LugDown法原理与特点,通过分析检测过程质控节点、作弊与不规范操作特征等,针对性地制定技术控制措施以促进设备控制性能的改进与完善,并用机动车排放监督管理系统和视频实现防作弊控制,就能有效规范LugDown法操作行为.     

废旧锌锰电池生物淋滤-水热法制备纳米锰锌铁氧体

以氧化硫硫杆菌(A.thiooxidans)和氧化亚铁钩端螺旋菌(L.ferrooxidans)为混合淋滤菌株对废旧锌锰电池进行了生物浸提,并以获取的淋滤液为前驱体,采用水热法制备出系列锰锌铁氧体软磁材料(Mn_(1-x)Zn_xFe_2O_4,x=0.2~0.8);结合X射线衍射(XRD)、扫描电镜-能谱(SEMEDX)、振动样品磁强计(VSM)、透射电镜(TEM)、红外光谱(FT-IR)、热重-差热分析(TG-DTA)等表征手段对制备材料的结构、形貌、磁学性能和稳定性进行分析.结果表明,在5%固液比(质量体积比,5 g/100 mL,以下均表述为"5%固液比")下,经过5 d的外源酸调控生物浸提,分别获得了84.5%、63.2%的Zn、Mn浸出效率;当Zn∶Mn∶Fe=0.4∶0.6∶2.0(物质的量比,即x=0.4)时,制备的纳米级Mn_(0.6)Zn_(0.4)Fe_2O_4性能最优,属纯相的立方尖晶石结构,颗粒分布均匀,饱和磁化强度(M_s)、剩余磁化强度(M_r)和矫顽力(H_c)分别为68.9 emu·g~(-1)、4.7 emu·g~(-1)和53.6 Oe,具有热稳定性和耐酸碱性,有望成为一种新型的水处理磁性材料.     

苯酚、菲在BS-12/DTAB复配修饰膨润土上吸附的差异

为了探究复配修饰膨润土吸附疏水性不同的污染物的差异,采用阳离子型表面修饰剂十二烷基三甲基溴化铵(DTAB)对两性表面修饰剂十二烷基二甲基甜菜碱(BS-12)修饰膨润土进行复配修饰,采用批处理法研究复配修饰膨润土总修饰比例对苯酚和菲的等温吸附影响,并对比不同温度、pH值和离子强度条件下供试土样对苯酚和菲吸附量、热力学参数的差异.结果表明:随着总修饰比例的增大,复配修饰膨润土对苯酚及菲的吸附能力逐渐增强,0~50%CEC修饰比例下,菲的吸附率大于苯酚的吸附率,当修饰比例超出50%CEC后,苯酚的吸附率大于菲的吸附率,总修饰比例超出150%CEC后,膨润土对苯酚的吸附率变化趋于平缓,而对菲的吸附率开始呈下降趋势;随着土样总修饰比例的增大,温度对苯酚及菲吸附量的抑制效果降低;在KNO_3浓度为0.001~0.1 mol·L~(-1)时,苯酚及菲的吸附量均随着KNO_3浓度的增大而增大;随着pH值的升高,苯酚的吸附量逐渐增大,在pH=7处达到最大,而菲的吸附量则始终呈降低趋势.热力学参数显示,随着总修饰比例的增大,复配修饰土样对苯酚和菲的吸附自发性增强,混乱度增大,当总修饰比例超出150%CEC后,自发性减弱,混乱度下降.     

某采油区石油污染土壤微生物群落特征研究

采用Biolog方法、最大或然数和主成分分析方法研究了某采油区污染场地及周围土壤的污染特征、微生物数量、微生物群落功能多样性以及相互作用关系.结果表明,土壤均一定程度受到石油污染,污染场地土壤呈现以萜类、姥鲛烷及植烷等难降解物质为主的污染特征,其土壤中微生物数量最多,总活菌数为1.73×1010个/g,石油烃降解菌数为...